Sale!

exploreblowtie2diaphragmspundingvalvewithgaugehopheadbrewsupplyandothervisitusandgetdiscount0.png

exploreblowtie2diaphragmspundingvalvewithgaugehopheadbrewsupplyandothervisitusandgetdiscount1.png

BlowTie 2 Diaphragm Spunding Valve with Gauge Hop Head Brew Supply

$ 11,99

SKU: mode_4555614552133 Category: Fermentation Equipment Tags: Fermentation Accessories, Fermzilla Accessories, Pressure Fermentation

Description
shopping

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a receiving keg during pressure transfers. This diaphragm spunding valve is much more accurate than the spring and poppet style, and works much better at lower pressures.

The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range.

Pressure Fermentation

Pressure fermentation is becoming more and more popular at the homebrew level, but in order to do it safely and accurately, you need a way to release excess pressure. You’ll pressurize your vessel to your desired psi, but once fermentation begins and those hungry, active yeast start creating CO2, the pressure inside the vessel will increase. Attach a spunding valve and set it to your desired pressure, and it will blow off when the pressure gets too high and close up again when it’s back to your desired psi.

Pressure Transfers

Even if you don’t have a pressurizable fermenter, you may have done pressure transfers from keg to keg during filtering or after fining. During pressure transfers, it’s a good idea to have a bit of head pressure in the receiving keg, especially if you’re transferring beer that is already carbonated. Having a spunding valve in place will allow you to consistently control the head pressure and give you more consistent results, without losing carbonation in the process.

Diaphragm vs. Poppet

With the poppet style spunding valve, a spring pushes against a poppet to keep the valve closed. When the poppet lifts up to open, the surface area the gas pushes against becomes larger, and the spring has to work harder to push the poppet down and reseal the valve. This can lead to more gas being released than intended, and the remaining pressure in your vessel may be at a lower psi than your spunding valve’s set psi.

Instead of a poppet, the spring inside the BlowTie pushes against a diaphragm, which has an immensely larger surface area. This means the surface area that the gas pushes against while the diaphragm is closed is significantly closer to the surface area it pushes against when the diaphragm is open. This leads to higher accuracy, and the remaining pressure after excess gas is released will be much closer to your set blow off pressure.

Set Up

The BlowTie spunding valve comes with 8 mm Duotight fittings on the inlet and outlet, and we recommend using it with EVABarrier 8 mm OD tubing. You’ll also need the flare Duotight fitting in order to attach it to a ball lock or pin lock disconnect. Dialing in your desired pressure is even easier with the BlowTie 2, thanks to the integrated pressure gauge. Simply start with the adjustment knob fully closed, then slowly open it until the gauge reading matches your desired pressure setting.

Specifications:

Made from food-grade acetal
Stainless screws
Easily disassembles for cleaning
8mm (5/16″) Duotight fittings at both ends
Interchangeable pressure gauge
Gauge reads from 0-15 psi

WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Professionally packed and fast shipping

Through our long-term relationship in a long-standing partnership with UPS, FedEx, DHL and many other top global carriers we can offer a variety of shipping options. Our warehouse staff is highly skilled and will package your items according to our precise and precise specifications. Prior to shipping, your goods will be thoroughly examined and secured. Everyday, we send to thousands of customers across multiple countries. Our determination to be the biggest online retailer around the globe is evident by this. There are distribution centers as well as warehouses across Europe and in the USA.

Note: Orders with more than one item are assigned a processing time in accordance with the item.

Prior to shipment, we check the item thoroughly before sending the items. Today, the majority of orders will be delivered within 48 hours. The time to deliver varies from 3-7 days.

Returns

The inventory is always changing and we do not fully manage it due to the fact that multiple parties are involved, including our factory and warehouse. The actual levels of stock can change at any point. Please be aware that it's possible that your order will be out of stock after you've placed your order.

The period of time is 30 days. If 30 days have gone without a trace since the purchase however, we're unable to give you a refund or exchange.

You can only return an item in the event that it is not used and still in the same state as when you received it. You must have the item in the original packaging.

BlowTie 2 Diaphragm Spunding Valve with Gauge Hop Head Brew Supply

Related products

Login